Auto Diagnostic Tool Cardboard Thickness Tester

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: YT-H18
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: 900kg
• Type: Thickness Tester
• Maxcapacity: <1000KN
• Weight: 0-100Kg
• Power Source: AC220V
• Contact Pressure: 100kpa
• Dimension: 160(L)*120(W)*250(H)mm
• Net Weight: 6kg
• Measured Header: Digital Indicatort Pointer Indicatortdigital Micro
• Measuring Range: 0-18mm
• Resolution: 0.01mm
• Indication Error: ±0.03mm
• Repeatability: ≤0.03mm
• Transport Package: Wooden Box
• Specification: 160(L)*120(W)*250(H)mm
• Trademark: YANTE
• Origin: Zhejiang
• Package Size: 21.00cm * 24.00cm * 50.00cm
• Package Gross Weight: 11.000kg

Product Description

Cardboard Thickness Tester

The special measuring instrument for measuring the thickness of cardboard, its main technical parameters and performance indicators are in line with the provisions of relevant standards, and it is widely used in the thickness measurement of various types of corrugated cardboard.

Product Description

Application Range

Various cardboards below 18mm

Standar

GB/T 6547,ISO3034

Measurement

Zero setting:
The instrument is placed on a horizontal table without vibration. Will digital dial indicator (gauge) / the dial test indicator properly be installed on the instrument. Note: The digital dial indicator must be firmly installed on the mounting seat.
If there is no test specimen, you should do a Zero Setting according "ZERO" on digital dial indicator (Zero Setting is not necessarily in the absolute zero, it can be any position within the measurement range );
If there is no test specimen, you can through rotating outer ring on dial indicator pointer to do the "Zero Setting" (Zero Setting is not necessarily in the absolute zero, it can be any position within the measurement range ) .
Measurement operation
Right hand presses the lifting lever to improve the measuring head. Put the sample into the measuring surface, slowly relax the lever so that the measuring head gently pressed on the sample (to avoid shock), to be stable (about 2~5s), that is, the right indicating value.
Every measurement point only can be measured once.
If you put multi-layered samples to test layer thickness, layer thickness divided by layers to get single layer thickness.

Key Technical Parameters

NO	Measuring range	Technical Indicators
1	Heating  mode	0-18mm
2	Resolution	0.01mm
3	Measurement area	(10 ± 0.2)cm²
4	Measurement pressure	(20 ± 0.5)kPa
5	Indication error	±0.03mm
6	Repeatability	≤0.03mm
7	Dimensions	170×140×400mm
8	Net weight	6.5kg

Sales And Service Network

Recommend Products

Company Profile

FAQ

Q: What's the lead time for orders?
A: Standard models ship in 7-10 days; customized units require 30–45 days.
 
Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).
 
Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.